Command Modes EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.7.1.0 Introduced on the S-Series.7.6.1.0 Introduced on the C-Series.7.4.1.0 Introduced on the E-Series.Example Dell# show lldp statisticsTotal number of neighbors: 300Last table change time : Mon Oct 02 16:00:52 2006Number of Table Inserts : 1621Number of Table Deletes : 200Number of Table Drops : 0Number of Table Age Outs : 400Dell#LLDP-MED CommandsThe following are the LLDP-MED (Media Endpoint Discovery) commands.Dell Networking OS LLDP-MED commands are an extension of the set of LLDP TLV advertisement commands.As defined by ANSI/TIA-1057, LLDP-MED provides organizationally specific TLVs (Type Length Value), so that endpoint devices andnetwork connectivity devices can advertise their characteristics and configuration information. The Organizational Unique Identifier (OUI)for the Telecommunications Industry Association (TIA) is 00-12-BB.• LLDP-MED Endpoint Device — any device that is on an IEEE 802 LAN network edge, can communicate using IP, and uses the LLDP-MED framework.• LLDP-MED Network Connectivity Device — any device that provides access to an IEEE 802 LAN to an LLDP-MED endpoint device,and supports IEEE 802.1AB (LLDP) and TIA-1057 (LLDP-MED). The Dell Networking system is an LLDP-MED network connectivitydevice.Regarding connected endpoint devices, LLDP-MED provides network connectivity devices with the ability to:• manage inventory• identify physical location• identify network policy968 Link Layer Discovery Protocol (LLDP)
