Version Description9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.1.1.0 Introduced on the E-Series.7.6.1.0 Introduced on the S-Series.Usage Information This feature groups two LAGs to work in tandem as a supergroup. For example, if one LAG goes down, the otherLAG is taken down automatically, providing an alternate path to reroute traffic, avoiding oversubscription on theother LAG. You can use both static and dynamic (LACP) LAGs to configure failover groups. For more information,see the “Port Channel” section in the Dell Networking OS Configuration Guide.Related Command • group — group two LAGs in a supergroup (“fate-sharing group”).• show interfaces port-channel — display information on configured Port Channel groups.show interfaces port-channelDisplay information on configured Port Channel groups.Syntax show interfaces port-channel [channel-number] [brief] [description]Parameters channel-number For a Port Channel interface, enter the keyword port-channel then a number. Therange is from 1 to 4096.NOTE: This command also enables you to view information corresponding to arange of ports.• For port-channel interfaces, you can specify multiple ports as port-range.For example, if you want to display information corresponding to all portsbetween 1 and 4, specify the port range as show interfaces port-channel 1 - 4.brief (OPTIONAL) Enter the keyword brief to display only the port channel number, thestate of the port channel, and the number of interfaces in the port channel.description (OPTIONAL) Displays the port-channel information with description.Command Modes • EXEC• EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.734 Interfaces
