Items Description802.1QTagged Displays whether if the VLAN tagged (“True”), untagged (“False”), or hybrid (“Hybrid”),which supports both untagged and tagged VLANs by the port.Vlan membership Lists the VLANs to which the interface is a member. Starting with Dell Networking OSversion 7.6.1, this field can display native VLAN membership by the port.Example Dell# show interfaces switchportName: TenGigabitEthernet 1/1/1/1802.1QTagged: HybridVlan membership:Vlan 2, Vlan 20Native VlanId: 20Name: TenGigabitEthernet 1/1/2/1802.1QTagged: TrueVlan membership:Vlan 2Name: TenGigabitEthernet 1/1/3/1802.1QTagged: TrueVlan membership:Vlan 2Name: TenGigabitEthernet 1/1/4/1802.1QTagged: TrueVlan membership:Vlan 2--More--Related Commands • interface — configure a physical interface on the switch.• show ip interface — display Layer 3 information about the interfaces.• show interfaces transceiver — display the physical status and operational status of an installed transceiver. Theoutput also displays the transceiver’s serial number.show interfaces transceiverDisplay the details of an installed transceiver.Syntax show interfaces [interface number] transceiverParameters interfaces interfacenumber(OPTIONAL) Enter one of the following keywords and then the interface information:• For a port channel interface, enter the keywords port-channel then a number.• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet thenthe stack/slot/port/subport information.• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then thestack/slot/port/subport information.• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/slot/port[/subport] information.• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/slot/port/subport information.• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then thestack/slot/port information.Interfaces 715
