Initiator Initiator Target Target ConnectionIP Address TCP Port IP Address TCPPort ID10.10.0.44 33345 10.10.0.101 3260 0Session 1 :----------------------------------------------------Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-35Up Time:00:00:01:22(DD:HH:MM:SS)Time for aging out:00:00:09:31(DD:HH:MM:SS)ISID:806978696102Initiator Initiator Target Target ConnectionIP Address TCP Port IP Address TCPPort ID10.10.0.53 33432 10.10.0.101 3260 0Related Commands • show iscsi — display the currently configured iSCSI settings.• show iscsi session — display information about active iSCSI sessions on the switch.• show run iscsi — show run iscsi.show run iscsiDisplay all globally configured non-default iSCSI settings in the current Dell Networking OS session.Syntax show run iscsiCommand Modes EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.8.3.19.0 Introduced on the S4820T.8.3.12.0 Introduced on the S4810.8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.Related Commands • show iscsi — display the currently configured iSCSI settings.• show iscsi session — display detailed information about active iSCSI sessions on the switch.• show iscsi session detailed — display detailed information on active iSCSI sessions on the switch.910 iSCSI Optimization
