Version Description9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.1.1.0 Introduced on the E-Series.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.Usage Information To fully enable DNS, also specify one or more domain name servers with the ip name-server command.Dell Networking OS does not support sending DNS queries over a VLAN. DNS queries are sent out all otherinterfaces, including the Management port.To view current bindings, use the show hosts command.Related Commands • ip name-server — specify a DNS server.• show hosts — view the current bindings.ip domain-nameConfigure one domain name for the switch.Syntax ip domain-name nameTo remove the domain name, use the no ip domain-name command.Parameters name Enter one domain name to be used to complete unqualified names (that is, incompletedomain names that cannot be resolved).Defaults Not configured.Command Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.IPv4 Routing 763
