NXP Semiconductors QorIQ LS1012A Reference Manual

Field FunctionHW_WR_DL_ERR0Automatic (HW) write calibration error of Byte0. If this bit is asserted then it indicates that an error wasfound during the HW calibration process of write delay-line 0. In case this bit is zero at the end of thecalibration process then the boundary results can be found at MPWRDLHWST0 register. This bit is validonly after HW_WR_DL_EN is de-asserted.0b - No error was found during the automatic (HW) write calibration process of write delay-line 0.1b - An error was found during the automatic (HW) write calibration process of write delay-line 0.23.9.1.47 MMDC PHY Read Delay HW Calibration Status Register 0(MPRDDLHWST0)23.9.1.47.1 OffsetRegister OffsetMPRDDLHWST0 868h23.9.1.47.2 DiagramBits 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15R 0 HW_RD_DL_UP1 0 HW_RD_DL_LOW1WReset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0Bits 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31R 0 HW_RD_DL_UP0 0 HW_RD_DL_LOW0WReset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 023.9.1.47.3 FieldsField Function0—-Reserved1-7HW_RD_DL_UP1HW_RD_DL_UP1Automatic (HW) read calibration result of the upper boundary of Byte1. This field holds the automatic(HW) read calibration result of the upper boundary of Byte18—-ReservedTable continues on the next page...MMDC Memory Map/Register DefinitionQorIQ LS1012A Reference Manual, Rev. 1, 01/20181204 NXP Semiconductors