default-information originateConfigure the FTOS to generate a default external route into an OSPF routing domain.C-Series, E-Series, S-Series, Z-Series, S4810Syntax default-information originate [always] [metric metric-value][metric-type type-value] [route-map map-name]To return to the default values, use the no default-information originatecommand.Parameters always (OPTIONAL) Enter the keyword always to specify that default routeinformation must always be advertised.metricmetric-value(OPTIONAL) Enter the keyword metric followed by a number toconfigure a metric value for the route. The range is 1 to 16777214.metric-typetype-value(OPTIONAL) Enter the keywords metric-type followed by anOSPF link state type of 1 or 2 for default routes. The values are:• 1 = Type 1 external route• 2 = Type 2 external routeroute-mapmap-name(OPTIONAL) Enter the keywords route-map followed by the nameof an established route map.Defaults Disabled.Command Modes ROUTER OSPFCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Added support for the Multi-Process OSPF.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.1Introduced on the E-Series.RelatedCommandsredistribute – redistributes routes from other routing protocols into OSPF.1045
