UsageInformationYou must create a policy-map by associating a queue number with the qos-policy.You must create QoS policies prior to enabling this command.For CoPP, the keywords cpu-qos must not be used when creating qos-policy-input.RelatedCommandsqos-policy-input – creates a QoS input policy map.policy-map-input – creates an input policy map.service-policy rate-limit-protocolsApply a policy for the system to rate limit control protocols on a per-protocol basis.S4810, Z-SeriesSyntax service-policy rate-limit-protocols policy-nameParameterspolicy-name Enter the service-policy name, using a string up to 32 characters.Defaults Not configured.Command Modes CONTROL-PLANE-CPUQOSCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.8.0 Introduced on the S4810.UsageInformationThis command applies the service-policy based on the type of protocol defined in the ACLrules.You must create ACL and QoS policies prior to enabling this command.For CoPP, the keyword cpu-qos must not be used when creating qos-policy-input.RelatedCommandsip access-list extended – creates an extended IP ACL.mac access-list extended – creates an extended MAC ACL.qos-policy-input – creates a QoS input policy map.class-map – creates a QoS class map.policy-map-input – creates an input policy map.562
