NOTE: The :: notation specifies successive hexadecimal fields ofzeros.peer-grouppeer-group-name(OPTIONAL) Enter the keywords peer-group followed by the nameof the peer group.in (OPTIONAL) Enter the keyword in to view BGP notifications receivedfrom neighbors.out (OPTIONAL) Enter the keyword out to view BGP notifications sent toneighbors.Command Modes EXEC PrivilegeCommand History Version 8.2.1.0 Introduced on the E-Series ExaScale.Version 7.4.1.0 IntroducedUsageInformationEnter the no debug ip bgp command to remove all configured debug commands for BGP.debug ip bgp updatesAllows you to view information about BGP updates.C-Series, E-SeriesSyntax debug ip bgp [ipv6-address | peer-group peer-group-name | ipv6unicast [ipv6-address]] updates [in | out | prefix-list prefix-list-name]To disable debugging, use the no debug ip bgp [ip-address | peer-grouppeer-group-name | ipv6 unicast [ipv6-address]] updates [in |out] command.Parameters ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed bythe prefix length in the /x format. The range is /0 to /128.NOTE: The :: notation specifies successive hexadecimal fields ofzeros.peer-grouppeer-group-name(OPTIONAL) Enter the keywords peer-group followed by the nameof the peer group.in (OPTIONAL) Enter the keyword in to view BGP updates receivedfrom neighbors.out (OPTIONAL) Enter the keyword out to view BGP notificationsupdates sent to neighbors.Command Modes EXEC PrivilegeCommand History Version 8.2.1.0 Introduced on the E-Series ExaScale.475
