![Dell Force10 Z9000 Reference Manual Manual pdf 650 page image](https://manuals-archive2.s3.amazonaws.com/3017072/164e6a6619d11e0f1c0e682c9c504288650f.jpg)
simply rely on GVRP for VLAN updates. But if the local bridge needs to know only how to reach a given VLAN,then GVRP provides all necessary information.• The VLAN topologies that GVRP learns are treated differently from VLANs that are statically configured. TheGVRP dynamic updates are not saved in NVRAM, while static updates are saved in NVRAM. When GVRP isdisabled, the system deletes all VLAN interfaces that were learned through GVRP and leaves unchanged allVLANs that were manually configured.clear gvrp statisticsClear GVRP statistics on an interface.C-Series, E-Series, S-Series, Z-Series, S4810Syntax clear gvrp statistics interface interfaceParameters interfaceinterfaceEnter the following keywords and slot/port or number information:• For a Fast Ethernet interface, enter the keywordFastEthernet followed by the slot/port information.• For a 1-Gigabit Ethernet interface, enter the keywordGigabitEthernet followed by the slot/port information.• For a Port Channel interface, enter the keywords port-channel followed by a number. For the C-Series and S-Series, the range is 1 to 128. For the E-Series, the range is 1 to255 for TeraScale and 1 to 512 for ExaScale.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet followed by the slot/portinformation.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE followed by the slot/port information.Defaults noneCommand Modes EXECCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on C-Series, E-Series, and S-SeriesRelatedCommandsshow gvrp statistics – displays the GVRP statistics.650