To stop redistribution of OSPF routes, use the no redistribute ospf process-idcommand.Parametersprocess-id Enter the number of the OSPF process. The range is 1 to 65535.match external {1| 2}(OPTIONAL) Enter the keywords match external to redistributeOSPF external routes. You can specify 1 or 2 to redistribute thoseroutes only.match internal (OPTIONAL) Enter the keywords match internal to redistributeOSPF internal routes only.route-mapmap-name(OPTIONAL) Enter the keywords route-map followed by the nameof a configured route map.Defaults Not configured.Command Modes ROUTER BGP Address Family (conf-router_bgp_af)Command History Version 7.8.1.0 Introduced on the S-Series.Version 7.7.1.0 Introduced on the C-Series.Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.UsageInformationWhen you enter the redistribute isis process-id command without any otherparameters, FTOS redistributes all OSPF internal routes, external type 1 routes, and externaltype 2 routes. This feature is not supported by an RFC.This feature is not supported by an RFC.show ip bgp ipv4 multicastView the current MBGP routing table for the system.C-Series, E-Series TeraScale, S-SeriesSyntax show ip bgp ipv4 multicast [detail | network [network-mask][length]]Parameters detail (OPTIONAL) Enter the keyword detail to display BGP internalinformation for the IPv4 Multicast address family.network (OPTIONAL) Enter the network address (in dotted decimal format) ofthe BGP network to view information only on that network.network-mask (OPTIONAL) Enter the network mask (in slash prefix format) of theBGP network address.longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view allroutes with a common prefix.Command Modes • EXEC• EXEC Privilege433
