Dell Force10 Z9000 Reference Manual

Also see for Force10 Z9000: Manual Quick start guide Configuration guide Installing Configuration guide

Contents

Dell Force10 Z9000 Reference Manual Manual pdf 1450 page image

stack-unit stack-groupConfigure stacking group specified by ID.S4810Syntax [no] stack-unit unit-id stack-group stack-group-idParametersunit-id Enter the stack unit ID.stack-group-id Enter the stack group ID. The range is 0 to 16.[no] Use no stack-unit unit-id stack-group stack-idto remove the current stack group configuration.Command Modes CONFIGURATIONCommand History Version 8.3.10.2 Introduced on the S4810.UsageInformation WARNING: The following message displays to confirm the command: All non-default configurations on the related member ports ports( listed here>) will be removed. Do you want tocontinue (y/n)? If you enter “y”, all non-default configurations on any memberports of the current stack group is removed when the unit is rebooted.vlan-stack accessSpecify a Layer 2 port or port channel as an access port to the stackable VLAN network.C-Series, E-Series, S-Series, Z-Series, S4810Syntax vlan-stack accessTo remove access port designation, use the no vlan-stack access command.Defaults Not configured.Command Modes INTERFACECommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.2.1.0 Introduced on the E-Series ExaScale.Version 7.6.1.0 Introduced on the C-Series and S-Series.E-Series originalCommand1450