path-count Enter the number paths supported. The range is 2 to 64.Defaults DisabledCommand Modes • ROUTER BGP• ROUTER BGP-address-familyCommand History Version 8.3.11.0 Introduced on the Z9000.Version 8.3.8.0 Introduced on the S4810.RelatedCommandsneighbor add-path – specifies that this neighbor/peer group can send/receive multiple pathadvertisements.bgp always-compare-medAllows you to enable comparison of the MULTI_EXIT_DISC (MED) attributes in the paths from different external ASs.C-Series, E-Series, S-Series, Z-Series, S4810Syntax bgp always-compare-medTo disable comparison of MED, enter no bgp always-compare-med.Defaults Disabled (that is, the software only compares MEDs from neighbors within the same AS).Command Modes ROUTER BGPCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.2.1.0 Introduced command.Version 7.7.1.0 Introduced on the C-Series.UsageInformationAny update without a MED attribute is the least preferred route.If you enable this command, use the clear ip bgp * command to recompute the bestpath.bgp asnotationAllows you to implement a method for AS number representation in the command line interface (CLI).C-Series, E-Series, S-Series, Z-Series, S4810Syntax bgp asnotation [asplain | asdot+ | asdot]To disable a dot or dot+ representation and return to ASPLAIN, enter the no bgpasnotation command.Defaults asplain332
