172.21.110.1 Gi 13/6 v2/S 0 30 1 172.21.110.1172.21.203.1 Gi 13/7 v2/S 0 30 1 172.21.203.1show ip pim neighborView PIM neighbors.C-Series, E-Series, S-Series, Z-Series, S4810Syntax show ip pim neighborCommand Modes • EXEC• EXEC PrivilegeCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.12.0 Introduced on the S4810.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.8.1.0 Introduced on the S-Series.UsageInformationThe following describes the show ip pim neighbor command shown in the Examplebelow.Field DescriptionNeighbor address Displays the IP address of the PIM neighbor.Interface List the interface type, with either slot/port information or ID (VLANor Port Channel), on which the PIM neighbor was found.Uptime/expires Displays the amount of time the neighbor has been up followed bythe amount of time until the neighbor is removed from the multicastrouting table (that is, until the neighbor hold time expires).Ver Displays the PIM version number.• v2 = PIM version 2DR prio/Mode Displays the Designated Router priority and the mode.• 1 = default Designated Router priority (use the ip pimdr-priority command)• DR = Designated Router• S = Sparse modeExample FTOS#show ip pim neighborNeighbor Interface Uptime/Expires Ver DRAddress Prio/Mode1141
