UsageInformationIf you do not add a parameter such as arp or mac, the output displays all of the counters.Example FTOS# show vlt counterTotal VLT counters-------------------------L2 Total MAC-Address Count :IGMP MRouter Vlans count :IGMP Mcast Groups count :ARP entries count :Example (igmp-snoop)FTOS# show vlt counter igmp-snoopTotal IGMP VLT counters----------------------IGMP MRouter Vlans count : 1IGMP Mcast Groups count : 5Example (igmp-snoop interfaceport-channel)FTOS#show vlt counter igmp-snoop interface port-channel 2VLT Port-ID: 2 IGMP Counter-----------------------IGMP MRouter Vlans count : 0IGMP Mcast Groups count : 5FTOS# show vlt counter igmp-snoop interface port-channel 100VLT Port-ID: 100 IGMP Counter-----------------------IGMP MRouter Vlans count : 1IGMP Mcast Groups count : 0Veshow vlt detailDisplays detailed status information about VLT domains currently configured on the switch.Z-Series, S4810Syntax show vlt detailDefault Not configured.Command Modes EXECCommand History Version 9.0.0.0 Introduced on the Z9000.Version 8.3.8.0 Introduced on the S4810.Example FTOS# FTOS(conf-if-vl-100)#show vlt detailLocal LAG Id Peer LAG Id Local Status Peer Status Active VLANs------------ ----------- ------------ -------------------------10 10 UP UP 100, 200, 300,400,1463
