Use this parameter only with a password that you copied from theshow running-config file of another Dell Force10 router.password Enter a text string, up to 32 characters long, as the clear textpassword.Defaults Not configured.Command History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.0Introduced on the E-Series.UsageInformationOnly Dell Force10 Technical Support staff use this command.enable secretChange the password for the enable command.C-Series, E-Series, S-Series, Z-Series, S4810Syntax enable secret [level level] [encryption-type] passwordTo delete a password, use the no enable secret [encryption-type] password[level level] command.Parameters levellevel (OPTIONAL) Enter the keyword level followed by a number as thelevel of access. The range is 1 to 15.encryption-type (OPTIONAL) Enter the number 5 or 0 as the encryption type.Enter a 5 followed by a text string as the hidden password. The textstring must be a password that was already encrypted by a DellForce10 router.Use this parameter only with a password that you copied from theshow running-config file of another Dell Force10 router.password Enter a text string, up to 32 characters long, as the clear textpassword.Defaults No password is configured.level = 15.Command Modes CONFIGURATIONCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.1298
