Object MissingThis object is not available in the repository.advertise-intervalSet the time interval between VRRP advertisements.C-Series, E-Series, S-Series, Z-Series, S4810Syntax advertise-interval secondsTo return to the default settings, use the no advertise-interval command.Parametersseconds Enter a number of seconds. The range is 1 to 255. The default is 1second.Defaults 1 secondCommand Modes INTERFACE-VRRPCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.2.1.1Introduced on the E-Series.UsageInformationDell Force10 recommends keeping the default setting for this command. If you do change thetime interval between VRRP advertisements on one router, you must change it on all routers.authentication-typeEnable authentication of VRRP data exchanges.C-Series, E-Series, S-Series, Z-Series, S4810Syntax authentication-type simple [encryption-type] passwordTo delete an authentication type and password, use the no authentication-typecommand.Parameters simple Enter the keyword simple to specify simple authentication.encryption-type (OPTIONAL) Enter one of the following numbers:• 0 (zero) specifies an un-encrypted authentication data willfollow.• 7 (seven) specifies a hidden authentication data will follow.• LINE is the un-encrypted (cleartext) authentication data.1471
