PI D Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process0x00000090 140 14 10000 0.00% 0.00% 0.00% 0 vrrp0x0000008d 120 12 10000 0.00% 0.00% 0.00% 0 fvrp0x00000088 360 36 10000 0.00% 0.00% 0.00% 0 xstp0x00000084 60 6 10000 0.00% 0.00% 0.00% 0 span0x00000083 180 18 10000 0.00% 0.00% 0.00% 0 pim0x00000080 80 8 10000 0.00% 0.00% 0.00% 0 igmp0x0000007b 130 13 10000 0.00% 0.00% 0.00% 0 ipm20x00000078 700 70 10000 0.00% 0.00% 0.00% 0 mrtm0x00000074 100 10 10000 0.00% 0.00% 0.00% 0 l2mgr0x00000070 80 8 10000 0.00% 0.00% 0.00% 0 l2pm0x0000006c 80 8 10000 0.00% 0.00% 0.00% 0 arpm0x00000068 60 6 10000 0.00% 0.00% 0.00% 0 acl20x00000064 750 75 10000 0.00% 0.00% 0.00% 0 sysd20x00000062 0 0 0 0.00% 0.00% 0.00% 0 sysmon0x00000024 880 88 10000 0.00% 0.00% 0.00% 0 sshd0x00000022 0 0 0 0.00% 0.00% 0.00% 0 inetd0x00000020 2250 225 10000 0.00% 0.00% 0.00% 0mount_mfs0x00000013 0 0 0 0.00% 0.00% 0.00% 0mount_mfs0x00000006 100 10 10000 0.00% 0.00% 0.00% 0 sh0x00000005 0 0 0 0.00% 0.00% 0.00% 0 aiodoned0x00000004 960 96 10000 0.00% 0.00% 0.00% 0 ioflush0x00000003 140 14 10000 0.00% 0.00% 0.00% 0 reaper0x00000002 0 0 0 0.00% 0.00% 0.00% 0pagedaemon0x00000001 160 16 10000 0.00% 0.00% 0.00% 0 init0x00000000 700 70 10000 0.00% 0.00% 0.00% 0 swapper0x00000098 140 14 10000 0.00% 0.00% 0.00% 0 msdpshow processes cpu (S-Series)Display CPU usage information based on processes running in an S-Series or Z-Series.S-Series, Z-SeriesSyntax show processes cpu [management-unit 1-99 [details] | stack-unitid | summary | ipc | memory [stack-unit id]]Parameters management-unit1-99 [details](OPTIONAL) Display processes running in the control processor. The1-99 variable sets the number of tasks to display in order of thehighest CPU usage in the past five (5) seconds. Add the keyworddetails to display all running processes (except sysdlp). Refer toExample (management-unit).stack-unitid (OPTIONAL) Enter the keyword stack-unit followed by the stackmember ID.As an option of the show processes cpu command, this optiondisplays CPU usage for the designated stack member. Or, as anoption of the command, this option limits the output of memorystatistics to the designated stack member.158
