Parameters1-10 Enter the number of maximum number of incoming SSH connectionsallowed per minute. The range is 1 to 10 per minute. The default is 10per minute.Defaults 10 per minuteCommand Modes CONFIGURATIONCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.0Introduced on the E-Series.ip ssh hostbased-authenticationEnable hostbased-authentication for the SSHv2 server.C-Series, E-Series, S-Series, Z-Series, S4810Syntax ip ssh hostbased-authentication enableTo disable hostbased-authentication for SSHv2 server, use the no ip ssh hostbased-authentication enable command.Parameters enable Enter the keyword enable to enable hostbased-authentication forSSHv2 server.Defaults Disabled.Command Modes CONFIGURATIONCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.0Introduced on the E-Series.UsageInformationIf you enable this command, clients can login without a password prompt. This provides twolevels of authentication:• rhost-authentication is done with the file specified in the ip ssh rhostfilecommand.1327
