RelatedCommandsshow ip bgp dampened-paths – views the BGP paths.bgp default local-preferenceChange the default local preference value for routes exchanged between internal BGP peers.C-Series, E-Series, S-Series, Z-Series, S4810Syntax bgp default local-preference valueTo return to the default value, use the no bgp default local-preferencecommand.Parametersvalue Enter a number to assign to routes as the degree of preference forthose routes. When routes are compared, the higher the degree ofpreference or local preference value, the more the route is preferred.The range is 0 to 4294967295. The default is 100.Defaults 100Command Modes ROUTER BGPCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the S-Series.Version 7.7.1.0 Introduced on the C-Series.UsageInformationThe bgp default local-preference command setting is applied by all routers withinthe AS. To set the local preference for a specific route, use the set local-preferencecommand in ROUTE-MAP mode.RelatedCommandsset local-preference – assigns a local preference value for a specific route.bgp enforce-first-asDisable (or enable) enforce-first-as check for updates received from EBGP peers.C-Series, E-Series, S-Series, Z-Series, S4810Syntax bgp enforce-first-asTo turn off the default, use the no bgp enforce-first-as command.Defaults EnabledCommand Modes ROUTER BGPCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.340
