UsageInformationThe set local-preference command changes the LOCAL_PREF attribute for routesmeeting the route map criteria. To change the LOCAL_PREF for all routes, use the bgpdefault local-preference command.RelatedCommandsbgp default local-preference – changes the default LOCAL_PREF attribute for all routes.set metricConfigure a filter to assign a new metric to redistributed routes.C-Series, E-Series, S-Series, Z-Series, S4810Syntax set metric [+ | -] metric-valueTo delete a setting, enter no set metric.Parameters + (OPTIONAL) Enter + to add a metric-value to the redistributed routes.- (OPTIONAL) Enter - to subtract a metric-value from the redistributedroutes.metric-value Enter a number as the new metric value. The range is zero (0) to4294967295.Defaults Not configured.Command Modes ROUTE-MAPCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.0Introduced on the E-Series.RelatedCommandsset automatic-tag – computes the tag value of the route.set level – specifies the OSPF area for route redistribution.set metric-type – specifies the route type assigned to redistributed routes.set tag – specifies the tag assigned to redistributed routes.set metric-typeConfigure a filter to assign a new route type for routes redistributed to OSPF.C-Series, E-Series, S-Series, Z-Series, S4810Syntax set metric-type {internal | external | type-1 | type-2}298
