Command Modes • EXEC• EXEC PrivilegeCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.E-Series legacycommand.UsageInformationIGMP commands acceptonly non-VLAN interfaces—specifying VLAN does not yield results.Example FTOS#show ip igmp interfaceGigabitEthernet 0/0 is down, line protocol is downInternet protocol processing disabledGigabitEthernet 0/5 is down, line protocol is downInternet protocol processing disabledGigabitEthernet 0/6 is down, line protocol is downInternet protocol processing disabledGigabitEthernet 0/7 is up, line protocol is downInternet protocol processing disabledGigabitEthernet 7/9 is up, line protocol is upInternet address is 10.87.5.250/24IGMP is enabled on interfaceIGMP query interval is 60 secondsIGMP querier timeout is 120 secondsIGMP max query response time is 10 secondsIGMP last member query response interval is 1000 msIGMP activity: 0 joins, 0 leavesIGMP querying router is 10.87.5.250 (this system)IGMP version is 2show ip igmp ssm-mapDisplay is a list of groups that are currently in the IGMP group table and contain SSM mapped sources.C-Series, E-Series, S-Series, Z-Series, S4810Syntax show ip igmp ssm-map [group]Parametersgroup (OPTIONAL) Enter the multicast group address in the form A.B.C.D todisplay the list of sources to which this group is mapped.Command Modes • EXEC• EXEC Privilege679
