Parametersprefix-list name Enter the name of the prefix list.NOTE: There is a 140-character limit for prefix list names.Defaults noneCommand Modes CONFIGURATIONCommand History Version 9.0.0.0 Introduced on the Z9000.Version 8.3.10.0 Introduced on the S4810.RelatedCommandsshow ipv6 prefix-list – View the selected IPv6 prefix-list.max-pathsConfigure the maximum number of parallel routes (multipath support) BGP supports.C-Series, E-Series, S-Series, Z-Series, S4810Syntax max-paths {ebgp | ibgp} numberTo return to the default values, enter the no maximum-paths command.Parameters ebgp Enter the keyword ebgp to enable multipath support for External BGProutes.ibgp Enter the keyword ibgp to enable multipath support for Internal BGProutes.number Enter a number as the maximum number of parallel paths. The S4810range is 2 to 64.Defaults noneCommand Modes ROUTER BGPCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.8.0 Support 2 to 64 paths on the S4810. Command syntax changed tomax-path (was maximum-paths).Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the S-Series.Version 7.7.1.0 Introduced on the C-Series.UsageInformationIf you enable this command, use the clear ip bgp * command to recompute the bestpath.478
