Defaults Disabled.Command Modes CONFIGURATIONCommand History Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.4.1.0 Introduced on the E-Series.UsageInformationFTOS 7.8.1.0 and later enhances the sflow implementation for real time traffic analysis on the E-Series to provide extended gateway information in cases where the destination IP addressesare learned by different routing protocols and for cases where the destination is reachableover ECMP.RelatedCommandssflow extended-gateway enable – enables packing information on an extended gateway.sflow extended-switch enable – enables packing information on a switch.show sflow – displays the sFlow configuration.sflow extended-switch enableEnable packing information on a switch only.C-Series, E-Series, S-Series, Z-Series, S4810Syntax sflow extended-switch enableTo disable packing information, use the no sflow extended-switch [enable]command.Parameters enable Enter the keyword enable to enable global extended information.Defaults Disabled.Command Modes CONFIGURATIONCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.2.1.0 Introduced on S-Series Stacking.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.7.1.0 Introduced on the S-Series.Version 7.6.1.0 Introduced on the C-Series.Version 7.4.1.0 Introduced on the E-Series.UsageInformationFTOS 7.8.1.0 and later enhances the sflow implementation for real time traffic analysis on the E-Series to provide extended gateway information in cases where the destination IP addresses1354
