Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.1Introduced on the E-Series.RelatedCommandsshow ip ospf asbr – displays the VLAN configuration.distanceDefine an administrative distance for particular routes to a specific IP address.C-Series, E-Series, S-Series, Z-Series, S4810Syntax distance weight [ip-address mask access-list-name]To delete the settings, use the no distance weight [ip-address mask access-list-name] command.Parametersweight Specify an administrative distance. The range is 1 to 255. The defaultis 110.ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If youenter a router ID, you must include the mask for that router address.mask (OPTIONAL) Enter a mask in dotted decimal format or /n format.access-list-name (OPTIONAL) Enter the name of an IP standard access list, up to 140characters.Defaults 110Command Modes ROUTER OSPFCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Added support for the Multi-Process OSPF.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.1Introduced on the E-Series.1047
