Example The bold lines show enabling VLAN output reveals the output statistics counters for the VLAN.FTOS(conf)#enable vlan-output-countersFTOS(conf)#exitFTOS#show interface vlan 101Vlan 101 is down, line protocol is downAddress is 00:01:e8:26:e0:5b, Current address is00:01:e8:26:e0:5bInterface index is 1107787877Internet address is not setMTU 1554 bytes, IP MTU 1500 bytesLineSpeed 1000 MbitARP type: ARPA, ARP Timeout 04:00:00Last clearing of "show interface" counters 01:12:44Queueing strategy: fifoInput Statistics:0 packets, 0 bytesOutput Statistics:0 packets, 0 bytesTime since last interface status change: 01:12:44FTOS#FTOS#show interfaces vlan 1Vlan 1 is down, line protocol is downAddress is 00:01:e8:13:a5:aa, Current address is00:01:e8:13:a5:aaInterface index is 1107787777Internet address is not setMTU 1554 bytes, IP MTU 1500 bytesLineSpeed 1000 MbitARP type: ARPA, ARP Timeout 04:00:00Last clearing of "show interface" counters 01:36:01Queueing strategy: fifoInput Statistics:100000 packets, 10000000 bytesOutput Statistics:200000 packets, 20800000 bytesTime since last interface status change: 01:36:01FTOS#nameAssign a name to the VLAN.C-Series, E-Series, S-Series, Z-Series, S4810Syntax name vlan-nameTo remove the name from the VLAN, use the no name command.Parametersvlan-name Enter up to 32 characters as the name of the VLAN.Defaults Not configured.Command Modes INTERFACE VLAN941
