---------------------------------------------CP DOWNLOAD BOOT invalid invalidRP1 DOWNLOAD BOOT invalid invalidRP2 DOWNLOAD BOOT invalid invalidlinecard 0 is not present.linecard 1 DOWNLOAD BOOT invalid invalidlinecard 2 DOWNLOAD BOOT 4.7.5.387 6.5.1.8linecard 3 DOWNLOAD BOOT invalid invalidlinecard 4 DOWNLOAD BOOT invalid invalidlinecard 5 is not present.Peer RPM:=============================================Type Boot Type A B---------------------------------------------CP DOWNLOAD BOOT invalid invalidRP1 DOWNLOAD BOOT invalid invalidRP2 DOWNLOAD BOOT invalid invalidshow bootvarDisplay the variable settings for the E-Series boot parameters.C-Series, E-Series, Z-Series, S4810Syntax show bootvarCommand Modes EXEC PrivilegeCommand History Version 8.3.11.4 Output expanded to display current reload mode (normal orJumpstart).Version 8.3.11.1 Introduced on the Z9000.Version 7.5.1.0 Introduced on the C-Series.E-Series Original command.Example FTOS#show bootvarPRIMARY IMAGE FILE = ftp://box:password@10.31.1.205//home/5.3.1/5.3.1.0/FTOS-ED-RPM1-5.3.1.0.binSECONDARY IMAGE FILE = variable does not existDEFAULT IMAGE FILE = flash://FTOS-ED-5.3.1.0.binLOCAL CONFIG FILE = variable does not existPRIMARY HOST CONFIG FILE = variable does not existSECONDARY HOST CONFIG FILE = variable does not existPRIMARY NETWORK CONFIG FILE = variable does not existSECONDARY NETWORK CONFIG FILE = variable does not existCURRENT IMAGE FILE = ftp://box:password@10.31.1.205//home/5.3.1/5.3.1.0/FTOS-ED-RPM1-5.3.1.0.binCURRENT CONFIG FILE 1 = flash://startup-configCURRENT CONFIG FILE 2 = variable does not existCONFIG LOAD PREFERENCE = local firstBOOT INTERFACE GATEWAY IP ADDRESS = variable does not existFTOS#75
