port-vlan-id Enter the keywords port-vlan-id to advertise the port VLANidentification TLV.vlan-name Enter the keywords vlan-name to advertise the vlan-name TLV.This keyword is only supported on the C-Series and S-Series.Defaults Disabled.Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)Command History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.7.1.0 Introduced on the S-Series. Added the vlan-name option.Version 7.6.1.0 Introduced on the C-Series.Version 7.4.1.0 Introduced on the E-Series.RelatedCommandsprotocol lldp (Configuration) – enables LLDP globally.debug lldp interface – debugs LLDP.show lldp neighbors – displays the LLDP neighbors.show running-config lldp – displays the LLDP running configuration.advertise dot3-tlvAdvertise dot3 TLVs (Type, Length, Value).C-Series, E-Series, S-Series, Z-Series, S4810Syntax advertise dot3-tlv {max-frame-size}To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-size} command.Parameters max-frame-size Enter the keywords max-frame-size to advertise the dot3maximum frame size.Defaults noneCommand Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)Command History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.7.1.0 Introduced on the S-Series.Version 7.6.1.0 Introduced on the C-Series.956
