RelatedCommandsmonitor session – Creates a session for monitoring.show running-config monitor sessionDisplay the running configuration of all monitor sessions or a specific session.C-Series, E-Series, S-Series, S4810Syntax show running-config monitor session {session-ID}To display the running configuration for all monitor sessions, use the show running-config monitor session command.Parameterssession-ID (OPTIONAL) Enter a session identification number. The range 0 to65535.Defaults noneCommand Modes • EXEC• EXEC PrivilegeCommand History Version 8.3.11.1 Introduced on the S4810.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.7.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.Version 7.4.1.0 Introduced on the E-Series.UsageInformationThe monitoring command is saved in the running configuration at the Monitor Sessionmode level and can be restored after a chassis reload.Example FTOS#show running-config monitor session!monitor session 8source GigabitEthernet 10/46 destination GigabitEthernet10/1 direction rx!monitor session 11source GigabitEthernet 10/0 destination GigabitEthernet10/47 direction rxFTOS#show running-config monitor session 11!monitor session 11source GigabitEthernet 10/0 destination GigabitEthernet10/47 direction rx1153
