701 80 i*> 63.114.8.33 0 18508 701 80i*> 3.3.0.0/16 0.0.0.0 22 32768 ?63.114.8.35 0 18508 ?*> 4.0.0.0/8 63.114.8.33 0 18508 701 1 i*> 4.2.49.12/30 63.114.8.33 0 18508 209 i* 4.17.250.0/24 63.114.8.33 0 18508 2091239 13716 i*> 63.114.8.33 0 18508 7011239 13716 i* 4.21.132.0/23 63.114.8.33 0 18508 2096461 16422 i*> 63.114.8.33 0 18508 7016461 16422 i*> 4.24.118.16/30 63.114.8.33 0 18508 209 i*> 4.24.145.0/30 63.114.8.33 0 18508 209 i*> 4.24.187.12/30 63.114.8.33 0 18508 209 i*> 4.24.202.0/30 63.114.8.33 0 18508 209 i*> 4.25.88.0/30 63.114.8.33 0 18508 2093561 3908 i*> 5.0.0.0/9 63.114.8.33 0 0 18508 ?*> 5.0.0.0/10 63.114.8.33 0 0 18508 ?*> 5.0.0.0/11 63.114.8.33 0 0 18508 ?--More--RelatedCommandsshow ip bgp community – views the BGP communities.neighbor maximum-prefix – controls the number of network prefixes received.show ip bgp cluster-listView BGP neighbors in a specific cluster.C-Series, E-Series, S-Series, Z-Series, S4810Syntax show ip bgp [ipv4 unicast] cluster-list [cluster-id]Parametersipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to viewinformation only related to ipv4 unicast routes.cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format.Command Modes • EXEC• EXEC PrivilegeCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the S-Series.Version 7.7.1.0 Introduced on the C-Series.UsageInformationThe following describes the show ip bgp cluster-list command shown in theExample below.389
