show storm-control unknown-unicastDisplay the storm control unknown-unicast configuration.C-Series, E-Series, S-Series, Z-Series, S4810Syntax show storm-control unknown-unicast [interface]Parametersinterface (OPTIONAL) Enter one of the following interfaces to display theinterface specific storm control configuration:• For a 1-Gigabit Ethernet interface, enter the keywordGigabitEthernet followed by the slot/port information.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet followed by the slot/portinformation.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE followed by the slot/ port information.• For a SONET interface, enter the keyword sonet followed bythe slot/port information.• Fast Ethernet is not supported.Defaults noneCommand Modes • EXEC• EXEC PrivilegeCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.Version 6.5.1.0 Introduced on the E-Series.Example (E-Series)FTOS#show storm-control unknown-unicast gigabitethernet 11/1Unknown-unicast storm control configurationInterface Direction Percentage Wred Profile-------------------------------------------------Gi 11/1 Ingress 5.9 -Gi 11/1 Egress 5.7 w8FTOS#1404
