falling-thresholdvalue event-numberEnter the keywords falling-threshold followed by the value(64 bit) the falling-threshold alarm is either triggered or reset. Thenenter the event-number to trigger when the falling threshold exceedsits limit. This value is the same as the alarmFallingEventIndex or thealarmTable of the RMON MIB. If there is no corresponding falling-threshold event, the value is zero.ownerstring (OPTIONAL) Enter the keyword owner followed the owner name tospecify an owner for the alarm. This is the alarmOwner object in thealarmTable of the RMON MIB.Defaults ownerCommand Modes CONFIGURATIONCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.Version 6.1.1.0 Introduced on the E-Series.show rmonDisplay the RMON running status including the memory usage.C-Series, E-Series, S-Series, Z-Series, S4810Syntax show rmonDefaults noneCommand Modes EXECCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.Version 6.1.1.0 Introduced on the E-Series.Example FTOS# show rmonRMON statustotal memory used 218840 bytes.ether statistics table: 8 entries, 4608 bytesether history table: 8 entries, 6000 bytesalarm table: 390 entries, 102960 bytes1264
