sflow polling-interval (Interface)Set the sFlow polling interval at an interface (overrides the global-level setting.)C-Series, E-Series, S-Series, Z-Series, S4810Syntax sflow polling-interval interval valueTo return to the default, use the no sflow polling-interval interval command.Parametersinterval value Enter the interval value in seconds. The range is 15 to 86400 seconds.The default is the global counter polling interval.Defaults The same value as the current global default counter polling interval.Command Modes INTERFACECommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.2.1.0 Introduced on S-Series Stacking.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.7.1.0 Introduced on the S-Series.Version 7.6.1.0 Introduced on the C-Series.Version 7.4.1.0 Introduced on the E-Series.UsageInformationThis command sets the counter polling interval for an interface.RelatedCommandssflow polling-interval (Global) – globally sets the polling interval.sflow sample-rate (Global)Change the global default sampling rate.C-Series, E-Series, S-Series, Z-Series, S4810Syntax sflow sample-rate valueTo return to the default sampling rate, use the no sflow sample-rate command.Parametersvalue Enter the sampling rate value. For the C-Series and S-Series, therange is 256 to 8388608 packets. For the E-Series TeraScale andExaScale, the range is 2 to 8388608. Enter values in powers of 2 only;for example, 4096, 8192, 16384, etc. The default is 32768 packets.1356
