14Equal Cost Multi-Path (ECMP)Equal cost multi-path (ECMP) is supported on the Dell Force10 C-Series, E-Series, S-Series, Z-Series, or S4810 platforms.ecmp-groupProvides a mechanism to monitor traffic distribution on an ECMP link bundle. A system log is generated when thestandard deviation of traffic distribution on a member link exceeds a defined threshold.Z-Series, S4810Syntax ecmp-group {ecmp-group-id interface interface | link-bundle-monitor}To remove the selected interface, use the ecmp-group no interface command.To disable link bundle monitoring, use the ecmp-group no link-bundle-monitorcommand.Parametersecmp-group ID Enter the identifier number for the ECMP group. The range is 2 to 64.interface Enter the following keywords and slot/port to add the interface to theECMP group:• 1-Gigabit Ethernet interface, enter the keywordGigabitEthernet followed by the slot/port information• 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet followed by the slot/portinformation.• 40-Gigabit Ethernet interface, enter the keywordfortyGigE followed by the slot/port information• For a LAG interface, enter the keywords port-channelfollowed by the slot/port information. The range is 1 to 128.Defaults OffCommand Modes • CONFIGURATION• CONFIGURATION ECMP-GROUPCommand History Version 9.0.0.0 Introduced on the Z9000.Version 8.3.10.0 Introduced on the S4810.607
