Version 7.4.1.0 IntroducedUsageInformationEnter the no debug ip bgp command to remove all configured debug commands for BGP.default-metricAllows you to change the metrics of redistributed routes to locally originated routes. Use this command with theredistribute command.C-Series, E-SeriesSyntax default-metric numberTo return to the default setting, use the no default-metric command.Parametersnumber Enter a number as the metric to be assigned to routes from otherprotocols. The range is 1 to 4294967295.Defaults 0Command Modes ROUTER BGPCommand History Version 8.2.1.0 Introduced on the E-Series ExaScale.Version 7.4.1.0 IntroducedUsageInformationThe default-metric command in BGP sets the value of the BGP MULTI_EXIT_DISC (MED)attribute for redistributed routes only.RelatedCommands • bgp always-compare-med – enables comparison of all BGP MED attributes.• redistribute – redistributes routes from other routing protocols into BGP.descriptionEnter a description of the BGP routing protocol.C-Series, E-SeriesSyntax description {description}To remove the description, use the no description {description} command.Parametersdescription Enter a description to identify the BGP protocol (80 charactersmaximum).Defaults noneCommand Modes ROUTER BGPCommand History Version 8.2.1.0 Introduced on the E-Series ExaScale.476
