notifications Enter the keyword notifications to view BGP notifications.soft-reconfigurationEnter the keywords soft-reconfiguration to view onlyinformation on inbound BGP soft reconfiguration.updates Enter the keyword updates to view BGP updates.Command Modes EXEC PrivilegeCommand History Version 8.3.11.1 Introduced on the Z9000.Version 7.8.1.0 Introduced on the S-Series.Version 7.7.1.0 Introduced on the C-Series.UsageInformationTo view information on both incoming and outgoing routes, do not include the in and outparameters in the debugging command. The in and out parameters cancel each other; forexample, if you enter the debug ip bgp in command and then enter the debug ipbgp out command, you will not see information on the incoming routes.Entering a no debug ip bgp command removes all configured debug commands for BGP.RelatedCommandsdebug ip bgp events – views information about BGP events.debug ip bgp keepalives – views information about BGP keepalives.debug ip bgp notifications – views information about BGP notifications.debug ip bgp updates – views information about BGP updates.show debugging – views enabled debugging operations.debug ip bgp dampeningView information on routes being dampened.C-Series, E-Series TeraScale, Z-Series, S-SeriesSyntax debug ip bgp ipv4 multicast dampeningTo disable debugging, use the no debug ip bgp ipv4 multicast dampeningcommand.Parameters dampening Enter the keyword dampening to clear route flap dampeninginformation.Command Modes EXEC PrivilegeCommand History Version 8.3.11.1 Introduced on the Z9000.Version 7.8.1.0 Introduced on the S-Series.Version 7.7.1.0 Introduced on the C-Series.Version 7.6.1.0 Introduced IPv6 MGBP support for the E-Series.352
