Defaults Disabled.Command Modes INTERFACECommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the S-Series.Version 7.6.1.0 Introduced on the C-Series.pre-Version6.2.1.1Introduced on the E-Series.RelatedCommandsip split-horizon – sets the RIP routing updates to exclude routing prefixes.ip rip receive versionSet the interface to receive specific versions of RIP. The RIP version you set on the interface overrides the versioncommand in ROUTER RIP mode.C-Series, E-Series, S-Series, Z-Series, S4810Syntax ip rip receive version [1] [2]To return to the default, use the no ip rip receive version command.Parameters 1 (OPTIONAL) Enter the number 1 for RIP version 1.2 (OPTIONAL) Enter the number 2 for RIP version 2.Defaults RIPv1 and RIPv2Command Modes INTERFACECommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the S-Series.Version 7.6.1.0 Introduced on the C-Series.pre-Version6.2.1.1Introduced on the E-Series.UsageInformationIf you want the interface to receive both versions of RIP, use the ip rip receiveversion 1 2 command.RelatedCommandsip rip send version – sets the RIP version to be used for sending RIP traffic on an interface.version – sets the RIP version to be used for the switch software.1243
