Defaults noneCommand Modes • EXEC• EXEC PrivilegeCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on C-Series, E-Series, and S-SeriesExample FTOS#show garp timersGARP Timers Value (milliseconds)----------------------------------------Join Timer 200Leave Timer 600LeaveAll Timer 10000FTOS#RelatedCommandsgarp timers – sets the intervals (in milliseconds) for sending GARP messages.show gvrpDisplay the GVRP configuration.C-Series, E-Series, S-Series, Z-Series, S4810Syntax show gvrp [brief | interface]Parameters brief (OPTIONAL) Enter the keyword brief to display a brief summary ofthe GVRP configuration.interface (OPTIONAL) Enter the following keywords and slot/port or numberinformation:• For a Fast Ethernet interface, enter the keywordFastEthernet followed by the slot/ port information.• For a 1-Gigabit Ethernet interface, enter the keywordGigabitEthernet followed by the slot/port information.• For a Port Channel interface, enter the keywords port-channel followed by a number. For the C-Series and S-Series, the range is 1 to 128. For the E-Series, the range is 1 to255 for TeraScale and 1 to 512 for ExaScale.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet followed by the slot/portinformation.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE followed by the slot/port information.656
