NOTE: For rhostfile and pub-key-file, the administrator must FTP the file to thechassis.Example FTOS#confFTOS(conf)# ip ssh pub-key-file flash://knownhostsFTOS(conf)#RelatedCommandsshow ip ssh client-pub-keys – displays the client-public keys used for the host-basedauthentication.ip ssh rhostsfileSpecify the rhost file to be used for host-based authorization.C-Series, E-Series, S-Series, Z-Series, S4810Syntax ip ssh rhostsfile {WORD}ParametersWORD Enter the rhost file name for the host-based authentication.Defaults noneCommand Modes CONFIGURATIONCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.0Introduced on the E-Series.Example FTOS#confFTOS(conf)# ip ssh rhostsfile flash://shostsFTOS(conf)#UsageInformationThis command specifies the rhost file to be used for host-based authentication. Thiscreates/ file overwrites the flash:/ADMIN_DIR/ssh/shosts file and deletes theuser-specified file. Even though this is a global configuration command, it does not appear inthe running configuration because this command needs to be run just once.This file contains hostnames and usernames, for which hosts and users, rhost-authenticationcan be allowed.NOTE: For rhostfile and pub-key-file, the administrator must FTP the file to theswitch.1330
