show snmp userDisplay the information configured on each SNMP user name.C-Series, E-Series, S-Series, Z-SeriesSyntax show snmp userCommand Modes • EXEC• EXEC PrivilegeCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.E-Series legacycommandExample FTOS#show snmp userUser name: v1v2creaduEngine ID: 0000178B02000001E80214A8storage-type: nonvolatile activeAuthentication Protocol: NonePrivacy Protocol: NoneFTOS#snmp ifmib ifalias longDisplay the entire description string through the Interface MIB, which would be truncated otherwise to 63 characters.C-Series, E-Series, S-Series, Z-SeriesSyntax snmp ifmib ifalias longDefaults Interface description truncated beyond 63 characters.Command Modes CONFIGURATIONCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.unknown Introduced on the E-Series.Example !----command run on host connected to switch:------!> snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i1364
