Version 8.3.7.0 Introduced on the S4810.Version 7.7.1.0 Authentication key length increased to 42 characters.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.2.1.0Introduced on the E-Series.UsageInformationThe key configured on the switch must match the key configured on the RADIUS serverdaemon.If you configure the key parameter in the radius-server host command, the keyconfigured with the radius-server key command is the default key for all RADIUScommunications.RelatedCommandsradius-server host – configures a RADIUS host.radius-server retransmitConfigure the number of times the switch attempts to connect with the configured RADIUS host server before declaringthe RADIUS host server unreachable.C-Series, E-Series, S-Series, Z-Series, S4810Syntax radius-server retransmit retriesTo configure zero retransmit attempts, use the no radius-server retransmitcommand.To return to the default setting, use the radius-server retransmit 3 command.Parametersretries Enter a number of attempts that FTOS tries to locate a RADIUS server.The range is zero (0) to 100. The default is 3 retries.Defaults 3 retriesCommand Modes CONFIGURATIONCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.2.1.0Introduced on the E-Series.RelatedCommandsradius-server host – configures a RADIUS host.1310
