To return to the default, use the no dot1x reauth-max command.Parametersnumber Enter the permitted number of re-authentications. The range is 1 - 10.The default is 2.Defaults 2Command Modes INTERFACECommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the C-Series and S-Series.Version 7.4.1.0 Introduced on the E-Series.dot1x server-timeoutConfigure the amount of time after which exchanges with the server time out.C-Series, E-Series, S-Series, Z-Series, S4810Syntax dot1x server-timeout secondsTo return to the default, use the no dot1x server-timeout command.Parametersseconds Enter a time-out value in seconds. The range is 1 to 300, where 300 isimplementation dependant. The default is 30.Defaults 30 secondsCommand Modes INTERFACECommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the C-Series and S-Series.Version 7.4.1.0 Introduced on the E-Series.dot1x supplicant-timeoutConfigure the amount of time after which exchanges with the supplicant time out.C-Series, E-Series, S-Series, Z-Series, S4810Syntax dot1x supplicant-timeout secondsTo return to the default, use theno dot1x supplicant-timeout command.Parametersseconds Enter a time-out value in seconds. The range is 1 to 300, where 300 isimplementation dependant. The default is 30.1321
