show ip ospf statisticsDisplay OSPF statistics.C-Series, E-Series, S-Series, Z-Series, S4810Syntax show ip ospf process-id statistics global | [interface name{neighbor router-id}]Parametersprocess-id Enter the OSPF Process ID to show a specific process. If no ProcessID is entered, command applies only to the first OSPF process.global Enter the keyword global to display the packet counts received onall running OSPF interfaces and packet counts received andtransmitted by all OSPF neighbors.interfacename (OPTIONAL) Enter the keyword interface followed by one of thefollowing interface keywords and slot/port or number information:• For a 1-Gigabit Ethernet interface, enter the keywordGigabitEthernet followed by the slot/port information.• For Port Channel groups, enter the keywords port-channel followed by a number. For the C-Series and S-Series, the range is 1 to 128. For the E-Series, the range is 1 to255 for TeraScale.• For a SONET interface, enter the keyword sonet followed bythe slot/port information.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet followed by the slot/portinformation.• For a VLAN, enter the keyword vlan followed by a numberfrom 1 to 4094.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE followed by the slot/port information.neighborrouter-id(OPTIONAL) Enter the keyword neighbor followed by theneighbor’s router-id in dotted decimal format (A.B.C.D.).Defaults noneCommand Modes • EXEC• EXEC PrivilegeCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Added support for Multi-Process OSPF.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.1095
