Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.0Introduced on the E-Series.RelatedCommandsmatch interface – redistributes routes that match the next-hop interface.match ip address – redistributes routes that match an IP address.match ip next-hop – redistributes routes that match the next-hop IP address.match metric – redistributes routes that match a specific metric.match route-type – redistributes routes that match a route type.match tag – redistributes routes that match a specific tag.match metricConfigure a filter to match on a specified value.C-Series, E-Series, S-Series, Z-SeriesSyntax match metric metric-valueTo delete a value, use the no match metric [metric-value] command.Parametersmetric-value Enter a value to match. The range is zero (0)–4294967295.Defaults Not configured.Command Modes ROUTE-MAPCommand History Version 8.3.11.1 Introduced on the Z9000.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.0Introduced on the E-Series.RelatedCommandsmatch interface – redistributes routes that match the next-hop interface.match ip address – redistributes routes that match an IP address.match ip next-hop – redistributes routes that match the next-hop IP address.match ip route-source – redistributes routes that match routes advertised by other routers.match route-type – redistributes routes that match a route type.match tag – redistributes routes that match a specific tag.289
