---------------------------------------------0 0 up AC0 1 absentExample (stack-unit)FTOS#show environment stack-unit 0-- Unit Environment Status --Unit Status Temp Voltage--------------------------------------------0* online 49C ok* Management Unitshow inventory (C-Series and E-Series)Display the chassis type, components (including media), and FTOS version including hardware identification numbersand configured protocols.C-Series, E-SeriesSyntax show inventory [media slot]Parameters mediaslot (OPTIONAL) Enter the keyword media followed by the slot number.For the C-Series, the range is 0-7. For the E-Series, the range is 0 to 13on the E1200, 0 to 6 on the E600/E600i, and 0 to 5 on the E300.Defaults noneCommand Modes CONFIGURATIONCommand History Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.8.1.0 Output expanded to include SFP+ media on the C-Series.Version 7.7.1.0 Vendor field removed from output of the show inventorymedia command.Version 7.5.1.0 Introduced on the C-Series and expanded to include transceivermedia.Version 6.2.1.0 Expanded to include the Software Protocol Configuredfield on the E-Series.Version 5.3.1.0 Introduced on the E-Series.UsageInformationThe show inventory media command provides some details about installed pluggablemedia (for example, SFP and XFP). Use the show interfaces command to get more detailsabout installed pluggable media.Example The display output might include a double asterisk (**) next to the SFMs....0 CC-E-SFM ** 0004875 7490007411 A1 CC-E-SFM ** 0004889 7490007411 A...146
