• For a Port Channel interface, enter the keywords port-channel followed by a number. For the S-Series, the rangeis 1 to 128.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet followed by the slot/portinformation.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE followed by the slot/port information.vlanvlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID todisplay the MAC address assigned to the VLAN. The range is 1 to4094.Command Modes • EXEC• EXEC PrivilegeCommand History Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.Version 7.6.1.0 Introduced on the S-Series.show mac-address-tableDisplay the MAC address table.C-Series, E-Series, S-Series, Z-Series, S4810Syntax show mac-address-table [dynamic | static] [address mac-address| interface interface | vlan vlan-id] [count [vlan vlan-id][interface interface-type [slot [/port]]]]Parameters dynamic (OPTIONAL) Enter the keyword dynamic to display only those MACaddresses learned dynamically by the switch. Optionally, you canalso add one of these combinations: address/mac-address,interface/interface, or vlan vlan-id.static (OPTIONAL) Enter the keyword static to display only those MACaddress specifically configured on the switch. Optionally, you canalso add one of these combinations: address/mac-address,interface/interface, or vlan vlan-id.addressmac-address(OPTIONAL) Enter the keyword address followed by a MACaddress in the nn:nn:nn:nn:nn:nn format to display information on thatMAC address.interfaceinterface(OPTIONAL) Enter the keyword interface followed by theinterface type, slot and port information:931
