mac learning-limit station-move-violationSpecify the actions for a station move violation.C-Series, E-Series, S-Series, Z-Series, S4810Syntax mac learning-limit station-move-violation {log | shutdown-both| shutdown-offending | shutdown-original}To disable a configuration, use the no mac learning-limit station-move-violation command, followed by the configured keyword.Parameters log Enter the keyword log to generate a syslog message on a stationmove violation.shutdown-both Enter the keyword shutdown to shut down both the original andoffending interface and generate a syslog message.shutdown-offendingEnter the keywords shutdown-offending to shut down theoffending interface and generate a syslog message.shutdown-originalEnter the keywords shutdown-original to shut down theoriginal interface and generate a syslog message.Defaults noneCommand Modes INTERFACE (conf-if-interface-slot/port)Command History Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.2.1.0 Introduced on the S-Series.Version 7.8.1.0 Introduced on the C-Series.Version 7.5.1.0 Introduced on the E-Series.UsageInformationThis is supported on physical interfaces, static LAGs, and LACP LAGs.RelatedCommandsshow mac learning-limit – displays details of the mac learning-limit.mac learning-limit resetReset the MAC address learning-limit error-disabled state.C-Series, E-Series, S-Series, Z-Series, S4810Syntax mac learning-limit reset925
