Reading the CNT register adds two wait states to the register access due tosynchronization delays.Address: Base address + 4h offsetBit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0R 0 COUNTWReset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0TPMx_CNT field descriptionsField Description31–16ReservedThis field is reserved.This read-only field is reserved and always has the value 0.15–0COUNTCounter value30.3.3 Modulo (TPMx_MOD)The Modulo register contains the modulo value for the LPTPM counter. When theLPTPM counter reaches the modulo value and increments, the overflow flag (TOF) is setand the next value of LPTPM counter depends on the selected counting method (seeCounter ).Writing to the MOD register latches the value into a buffer. The MOD register is updatedwith the value of its write buffer according to MOD Register Update .It is recommended to initialize the LPTPM counter (write to CNT) before writing to theMOD register to avoid confusion about when the first counter overflow will occur.Address: Base address + 8h offsetBit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0R 0 MODWReset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1TPMx_MOD field descriptionsField Description31–16ReservedThis field is reserved.This read-only field is reserved and always has the value 0.15–0MODModulo valueWhen writing this field, all bytes must be written at the same time.Memory Map and Register DefinitionKL04 Sub-Family Reference Manual, Rev. 3.1, November 2012498 Freescale Semiconductor, Inc.
