7 Product-specific CAN objects XN300 slice modules7.1 XN-322-8DI-PD106 Gateway XN-312-GW-CAN 06/16 MN050003-EN www.eaton.eu7.1 XN-322-8DI-PDThis module supports the provision of data for digital inputs as per the speci-fications in CiA401. It allows for process data to be accessed with variousvendor-specific objects.A distinction is drawn between the following CANopen objects within thiscontext:• System-specific objects that the CANopen standard requires for a sys-tem.• Product-specific objects that the CANopen standard requires for a prod-uct group, e.g., for analog modules.• Vendor-specific objects that the CANopen standard does not require andthat the manufacturer implements for data communication purposes.Figure 51: Block diagram showing the various CANopen objects for digital inputsProduct-specific CANopen objectsManufacturer-specific objectsIndex range for the XN-322-8DI-PD module: x150 to x15FherstellerspezifischproduktspezifischCANTransmissionSingle Digital InputReceptionENTRYinto 6000hTRANSMITTPDO1MAP intoTPDO1CANTransmissionENTRYinto 3150hTRANSMITTPDO1MAP intoTPDO1Index(hex)Data Type Name Function Mapping Access0x6000 UNSIGNED8 I-BYTE Digital Input 8-bit Default ro PDO ￫ Section "7.1.1 ReadDigital Input 8-Bit (ObjectIndex(hex)Data Type Name Function Mapping Access0x1027 UNSIGNED16 ModuleID Module Identification Number￫ Section “6.2.6 ModuleIdentification Number (Object0x1027)”, page 76– ro SDO0x3150 UNSIGNED8 Input1_8 Read Digital Input 1_8 Manual ro PDO
