2 Installation2.3 Activate the bus termination resistor for CANopenGateway XN-312-GW-CAN 06/16 MN050003-EN www.eaton.eu 272.3 Activate the bus termination resistor for CANopenIf the XN-312-GW-CAN gateway is the last module on the field bus, the inte-grated bus termination resistor must be activated using DIP switch 10.▶ Set DIP switch 10 to the "ON" position.Figure 9: Activated bus termination resistor2 3 4 5 6 7 8 9 10DDRRSTB10((120 Ω))en Termination resistorde Abschlusswiderstandfr Résistance de terminaisones Resistencia de terminalit Resistenza di terminazionezh 终端阻抗ru Нагрузочный резисторON– OFF